Net-Trol is a powerful wood cleaner and brightener which restores greyed and weathered wood to its natural colour without damaging the wood’s fibres. It effortlessly removes both surface and ground in dirt leaving the wood looking bright and vibrant. Net-Trol is fast acting and can restore the original colour of your wood surface in as little as 15 minutes with no laborious and backbreaking sanding!
Benefits of using Net-Trol
It is safe to use on all exterior wood types and is also an excellent degreaser for use on tropical hardwoods to allow finishes like Deks Olje D1 to penetrate. Net-Trol can remove stains caused by tannin bleed and will remove all traces of weathering caused by mildew, pollution and UV rays. It will also neutralise wood surfaces which have been stripped with a stripping product such as Owatrol’s Dilunett or Prepdeck, leaving the surface ready for applying your chosen finish.
Net-Trol is not only for use on wood surfaces though – you can also use it to restore the lustre to faded plastics dulled by weathering and UV rays. It can also be used to remove rust stains and to clean discoloured stone and cement. Net-Trol is biodegradable and does not contain solvents or bleach. It’s not harmful to plants and shrubs so it’s safe to use in the garden!
Ideal Uses for Net-Trol Wood Cleaner
- Reviving neglected fence panels
- Cleaning greyed wooden garden furniture
- Restoring the colour of decking and cladding
- Brightening faded plastic guttering
- Removing rust stains from cement and brickwork
- Cleaning discoloured paving slabs and driveways
- Removing stains caused by tannin bleed
NOTE: Wear chemical resistant gloves, safety goggles and protective clothing
Application of Net-Trol Wood Cleaner & Colour Restorer
Application tools
- Soft brush
- Stiff bristle/nylon brush
- Pressure washer
- Wear chemical resistant gloves, safety goggles and protective clothing
Caution: Surfaces may be slippery when wet. Use caution when walking on wet surfaces during application. Net-Trol may dull painted surfaces and some metal fixings if left on to long. Rinse off quickly or wipe with a wet cloth.
Application
To use Net-Trol on wood:
- First wet the surface with fresh, clean water
- Apply Net-Trol with a synthetic brush or roller (medium or long pile)
- Scrub the surface with a stiff nylon/synthetic brush
- Leave to stand for approx 10-20 minutes. If the surface starts to dry, dampen with a mist application of water
- Scrub the surface whilst rinsing with water or use a pressure washer (max. 60 bar)
- If required repeat procedure
- Allow to dry for 48 hours or until it meets the moisture content required by the chosen finish before finishing
To use Net-Trol on stone or concrete:
- First wet the surface with fresh, clean water
- Apply Net-Trol with a synthetic brush or roller (medium or long pile)
- Scrub the surface with a stiff nylon/synthetic brush
- Leave to stand for approx 10-20 minutes. If the surface starts to dry, dampen with a mist application of water
- Scrub the surface whilst rinsing with water or use a pressure washer (max. 60 bar)
- If required repeat procedure
- Allow to dry until it meets the moisture content required by your chosen finish or sealer
To use Net-Trol on nail stains:
- First clean the surface
- After cleaning wet the surface with fresh clean water
- Apply Net-Trol to the entire surface over and around the nail stain
- Do not rinse until the stain has disappeared
To use Net-Trol on plastic or GRP:
- First wet the surface with fresh clean water
- Apply Net-Trol using a brush
- Leave it to work for 10 minutes
- Scrub the surface with a soft or medium nylon scrubbing brush
- Rinse with large amounts of fresh clean water
To use Net-Trol on rust stains:
- First wet the surface with fresh clean water.
- Apply Net-Trol with a stiff nylon scrubbing brush working it into the rust stain
- Leave to work for 10 minutes
- Scrub surface with stiff nylon scrubbing brush
- Rinse with large amounts of fresh clean water
Clean Up
Clean all tools used with soap and water.
After Clean Up
We recommend protecting and enhancing the natural beauty of your wood with Owatrol penetrating wood finishes.
Things to Remember
- Shake container thoroughly before use.
- Cover any areas you want to protect.
- Thoroughly wet surrounding plants and shrubs.
- Apply between 5˚C and 35˚C.
- Do not apply on a hot surface as the product will dry too quickly.
- If cleaning vertical wood, work from bottom to top to avoid streaking
Chris parker –
Verified Owner
Tried the sample on some wood cladding. Struggling to see much difference. I will try again but bearing in mind the cost of the product i would expect seriously better results
Owatrol Team –
Hi Chris,
We are sorry that you have not had a positive experience with Net-Trol. Can you please give us more information about what you were trying to remove and what method you used to do it so that we can understand the problem a little better?
Many thanks,
The Owatrol Team
Emma Johnson –
Verified Owner
I bought a sample size and I’m glad I did as it didn’t remove any of the marks or weathering from my summer house ,I had high hopes for this and yes I followed the instructions ,so back to the drawing board for me and my weathered summer house.
Owatrol Team –
Hi Emma,
We are sorry that you have not had a positive experience with Net-Trol. Can you give us a bit more information about what you were trying to remove and what method you used so that we can understand the problem a little better?
Many thanks,
The Owatrol Team